This information is provided free of charge by the Department of Industrial Relations
from its web site at www.dir.ca.gov. These regulations are for the
convenience of the user and no representation or warranty is made that the information
is current or accurate. See full disclaimer at https://www.dir.ca.gov/od_pub/disclaimer.html.
Subchapter 6. Elevator Safety Orders
Article 5. Standard Reference Documents
Article 5. Standard Reference Documents
§3004. Authority for Standard.
Authority for Standard | Date of Issue | Title or Description of Standard | See Section |
|---|---|---|---|
ACMA: | |||
420.03 | 1963 | Practice for Helical and Herringbone Gear Speed Reducers | 3091(n)(4) |
430.03 | 1963 | Practice for Speed Reducers and Increasers Employing Spiral Bevel Gearing | 3091(n)(4) |
440.03 | 1959 | Practice for Single and Double Reduction Cylindrical-Worm and Helical-Worm Speed Reducers | 3091(n)(4) |
441.03 | 1963 | Practice for Single and Double Reduction-Cylindrical, Double-Enveloping Worm and Helical-Worm Speed Reducers | 3091(n)(4) |
460.04 | 1965 | Practice for Gearmotors | 3091(n)(4) |
480.03 | 1965 | Practice for Helical, Herringbone and Spur Gear Shaft Mounted Speed Reducers | 3091(n)(4) |
ASTM: | |||
A36 | 1968 | Specification for Scructural Steel | M101(a)(1) |
A235 | 1967 | Specification for Carbon Steel Forgings for General Industrial Use | 3101(a)(1) |
3107(b)(3) | |||
3107(b)(5) | |||
A283 | 1967 | Specification for Low and Intermediate Tensile Strength Carbon Steel Plate of Structural Quality | 3101(a)(1) |
A307 | 1967 | Specification for Low Carbon Steel Externally and Internally Threaded Standard Fasteners | 3101(a)(1) |
3109(b)(2) | |||
3111(c)(1) | |||
3111(c)(2) | |||
A502 | 1965 | Specifications for Steel Structural Rivets | 3101(a)(1) |
3109(b)(3) | |||
3111(c)(2) | |||
D2270 | 1964 | Viscosity Index from Kinematic Viscosity | 3108(e) |
SAE: | |||
100-R2 | 1967 | High Pressure Steel Wire Reinforced Rubber Covered Hydraulic Hose | 3068(a)(3) |
Federal | |||
Specification | |||
DD-G-451c | 1968 | Glass, Plate, Sheet, Figured (Float, Flat, for Glazing, Corrugated, Mirrors, and Other Uses) | 3034(b) (5)(E) |
USAS: | |||
A2.5 | 1963 | Method of Test For Surface Burning Characteristics of Building Materials | 3101(a)(3) |
ASTM 84 | |||
NFPA 255 | 1961 | ||
A17.1 and | 1965 | Safety Code for Elevators, Dumb waiters, Escalators, and Moving Walks | 3000(d) |
Supplements | 1967 | 3108(f)(1) | |
.1a | |||
.1b | 1968 | ||
.1c | 1969 | ||
B2.1 | 1968 | Pipe Threads (Except Dry Seal) | 3102(g)(5) |
B29.1 | 1963 | Transmission Roller Chains and Sprocket Teeth | 3091(n)(5) |
B29.2 | 1957 | Inverted Tooth (Silent) Chains and Sprocket Teeth | 3091(n)(5) |
B31.1.0 | 1967 | Power Piping | 3102(g)(2) |
B55.1 | 1961 | Specifications for Multiple V-Belt Drives | 3091(n)(6) |
G50.1 | 1967 | Specifications for Mild to Medium Strength Carbon Steel Castings for General Application | 3101(a)(1) |
ASTM A27 | 1965 | 3107(b)(3) | |
Z11.5 | 1966 | Method of Test for Pour Point | 3108(e) |
ASTM D97 | 1966 | ||
Z97.1 | 1966 | Performance, Specifications and Method of Test for Transparent Safety Glazing Materials Used in Buildings | 3034(a)(7) |
3034(b)(5) | |||
3089(d)(2) | |||
3091(k)(1) | |||
3091(l) |
)
Group I regulations apply to existing and new elevator installations.
Go Back to Article 5 Table of Contents